View all questions & answers for the FCP - FortiAuthenticator 6.5 Administrator Exam Materials exam


Question 20 Discussion

You want to monitor FortiAuthenticator system information and receive FortiAuthenticator traps through SNMP. Which two configurations must be performed after enabling SNMP access on the FortiAuthenticator interface? (Choose two answers)

  • A. Associate an ASN.1 mapping rule to the receiving host.
  • B. Upload management information base (MIB) files to SNMP server.
  • C. Set the thresholds to trigger SNMP traps.
  • D. Enable logging services.
Correct Answer: B,C

Brave-Dump Clients Votes

BC 100%

Comments



Juan Diego Ruiz 2025-04-15 22:38:28

Selected Answers: B, C


You can configure SNMP on the SNMP page. The SNMP settings allow you to set the thresholds that trigger
various SNMP traps. Note that a setting of zero disables the trap.
However, before you can monitor FortiAuthenticator system information and receive FortiAuthenticator traps,
you must do the following:
• Configure one or more interfaces to accept SNMP connections. This allows a remote SNMP manager to
connect to the Fortinet agent. You can enable SNMP connections by enabling the SNMP service on the
required interface.
• Download the Fortinet and FortiAuthenticator MIB files for your SNMP manager. A MIB is a text file that
lists the SNMP data objects that apply to the device to be monitored. These MIBs provide information that
the SNMP manager needs to interpret the SNMP trap, event, and query messages sent by the
FortiAuthenticator SNMP agent. You can download the MIB files on the SNMP page on the GUI or from
the Customer Service & Support portal at https://support.fortinet.com. They are located in the
Firmware Images folder for the FortiAuthenticator product.