Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) Exam Materials - Question #225 Discussion

Guidelines

Please use the "Tasks" and "Topology" tabs to complete this lablet.

---

Complete the tasks below:

Task 1

Use the predefined Sales and Admin VRFs (interfaces configured) to complete the EIGRP configurations on R2 and R3 using these parameters:

• Use EIGRP process 10
• Do not use MPLS
• The Sales VRF resides in AS 500
• The Admin VRF resides in AS 600
• R2 and R3 must establish EIGRP adjacencies in their respective VRFs to route traffic.
• R3 (VRF Sales) and R4 (Non-VRF) must establish an EIGRP adjacency to route traffic.

---

Task 2

There is packet loss in the Sales VRF when R1 pings R4's Loopback0. Resolve the issue and confirm these facts:

• R1 (Non-VRF) and R2 (VRF Sales) must establish an EIGRP neighbor relationship in AS500.
• R1 and R4 should advertise and ping each other's Loopback0 in the Sales VRF.

Note: Disable automatic summarization in EIGRP on all routers. Do not configure VRFs on R1, R4, R5, and R6.

ِAnswers

 

R1
en
conf t
router eigrp 500
 network 10.0.0.0 0.0.0.3
 network 10.10.10.1 0.0.0.0
 no auto-summary
end
wr

R2
en
conf t
router eigrp 10
 address-family ipv4 vrf Sales
  network 10.0.0.0 0.0.0.3
  network 10.0.0.4 0.0.0.3
  autonomous-system 500
  no auto-summary
 exit-address-family
 address-family ipv4 vrf Admin
  network 10.0.24.0 0.0.0.3
  network 192.168.20.0 0.0.0.3
  autonomous-system 600
  no auto-summary
 exit-address-family
end
wr

R2
en
conf t
router eigrp 10
 address-family ipv4 vrf Sales
  network 10.0.0.0 0.0.0.3
  network 10.0.0.4 0.0.0.3
  autonomous-system 500
  no auto-summary
 exit-address-family
 address-family ipv4 vrf Admin
  network 10.0.24.0 0.0.0.3
  network 192.168.20.0 0.0.0.3
  autonomous-system 600
  no auto-summary
 exit-address-family
end
wr

R3
en
conf t
router eigrp 10
 address-family ipv4 vrf Sales
  network 10.0.0.4 0.0.0.3
  network 10.0.0.8 0.0.0.3
  autonomous-system 500
  no auto-summary
 exit-address-family
 address-family ipv4 vrf Admin
  network 192.168.20.0 0.0.0.3
  network 10.0.28.0 0.0.0.3
  autonomous-system 600
  no auto-summary
 exit-address-family
end
wr

R4
en
conf t
router eigrp 500
 network 10.0.0.8 0.0.0.3
 network 10.10.10.4 0.0.0.0
 no auto-summary
end
wr

(Choose the correct answer)

Brave-Dump Community Votes

No community votes submitted yet. Be the first to vote!