View all questions & answers for the Palo Alto Next-Generation Firewall Engineer Exam Materials exam
Palo Alto Next-Generation Firewall Engineer Exam Materials - Question #143 Discussion
Community Explanations & Comments (3)
Anonymous User
2 months ago
Selected: A
I don't sure meaning of "link group" is aggregate. If yes = A correct.
https://docs.paloaltonetworks.com/ngfw/networking/configure-interfaces/configure-an-aggregate-interface-group
1. Select NetworkInterfacesEthernet and Add Aggregate Group.
2. In the field adjacent to the read-only Interface Name, enter a number to identify the aggregate group. The range is 1 to the maximum number of aggregate interface groups supported by the firewall.
3. For the Interface Type, select HA, Virtual Wire, Layer2, or Layer3.
https://docs.paloaltonetworks.com/ngfw/networking/configure-interfaces/configure-an-aggregate-interface-group
1. Select NetworkInterfacesEthernet and Add Aggregate Group.
2. In the field adjacent to the read-only Interface Name, enter a number to identify the aggregate group. The range is 1 to the maximum number of aggregate interface groups supported by the firewall.
3. For the Interface Type, select HA, Virtual Wire, Layer2, or Layer3.
berry tomatoz
1 month ago
Selected: A
An Aggregate Ethernet (AE) interface group on Palo Alto firewalls uses IEEE 802.1AX/802.3ad link aggregation to bundle multiple physical Ethernet interfaces into one logical interface. The supported interface types for the group are:
>Layer 2
>Layer 3
>Virtual Wire
>HA3 (the packet-forwarding link in an Active/Active High Availability configuration)
>Layer 2
>Layer 3
>Virtual Wire
>HA3 (the packet-forwarding link in an Active/Active High Availability configuration)
Anonymous User
1 month ago
Selected: B
Both A and B seems valid to me, but i will go with A anyway
https://docs.paloaltonetworks.com/ngfw/networking/configure-interfaces/configure-an-aggregate-interface-group
1. Select NetworkInterfacesEthernet and Add Aggregate Group.
2. In the field adjacent to the read-only Interface Name, enter a number to identify the aggregate group. The range is 1 to the maximum number of aggregate interface groups supported by the firewall.
3. For the Interface Type, select HA, Virtual Wire, Layer2, or Layer3.
https://docs.paloaltonetworks.com/ngfw/networking/configure-interfaces/configure-an-aggregate-interface-group
1. Select NetworkInterfacesEthernet and Add Aggregate Group.
2. In the field adjacent to the read-only Interface Name, enter a number to identify the aggregate group. The range is 1 to the maximum number of aggregate interface groups supported by the firewall.
3. For the Interface Type, select HA, Virtual Wire, Layer2, or Layer3.
Which set of interface types is exclusively supported for inclusion in a link group? (Choose one answer)
Brave-Dump Community Votes