● Implementing and Operating Cisco Wireless Core Technologies (350-101 WLCOR) Exam Materials
Hello Dears, these questions were captured from the real Implementing and Operating Cisco Wireless Core Technologies (350-101 WLCOR) Exam. They can certainly help you prepare for the exam; however, they are not considered a 100% validated or fully corrected dump and passing cannot be guaranteed, for this reason, we are offering this material at a lower price, please note that this clarification applies only to the Implementing and Operating Cisco Wireless Core Technologies (350-101 WLCOR) Exam Materials, All other dumps available on our website are fully guaranteed, once the dump is fully prepared and validated, we will write another comment, Good luck with your exam preparation.
Question #1
Question #2
What is a benefit of applying TACACS authentication for device access? (Choose one answer)
- A. streamlined administrator access across platforms
- B. static user grouping without role differentiation
- C. fragmented statistics across controllers and devices
- D. single user for device and network access
Question #3
Refer to the exhibit. A network engineer is deploying a new Cisco 9800 WLC and is performing the Day-0 setup. The IP address and subnet mask have been assigned to the management interface, and network connectivity between the WLC and the upstream switch has been verified. Which CLI command must the engineer use next to configure management access? (Choose one answer)
- A. ip default-gateway 10.1.1.1
- B. default-route 0.0.255.255 0.0.255.255 10.1.1.1
- C. ip route 0.0.0.0 0.0.0.0 10.1.10.1
- D. route add default gw 10.1.10.1
Question #4
Which process enables seamless Layer 2 handoff in a wireless network during roaming? (Choose one answer)
- A. optimized roaming
- B. fast BSS transition protocol
- C. deferred probe response technique
- D. increased beacon interval setting
Question #5
A network administrator at a retail company has deployed a Cisco Catalyst 9800 WLC running Cisco IOS XE 17.x. The "XYZ-Employee" WLAN supports critical employee devices, but local authentication is causing performance issues and security concerns. To enhance security and offload authentication, the network administrator decides to configure an external RADIUS server for 802.1X authentication, integrating with Cisco ISE for centralized user management. The administrator must configure the controller to use an external RADIUS server named "ise-radius" with IPv4 address 192.168.10.5, authentication port 1812, and shared secret key "SecureKey123" for use in 802.1X authentication on the controller. Which Cisco IOS XE commands should be used? (Choose one answer)
- A. wireless authentication radius ise-radius
address 192.168.10.5 port 1812 key
SecureKey123 - B. aaa radius-server ise-radius
ip 192.168.10.5 port 1812
secret SecureKey123 - C. server radius ise-radius
ipv4 192.168.10.5 auth 1812
shared-key SecureKey123 - D. radius server ise-radius
address ipv4 192.168.10.5 auth-port 1812
key SecureKey123
Question #6
What is device sensitivity in a wireless environment? (Choose one answer)
- A. capability to process the signal
- B. detection of redundant gateways
- C. implementation of key refresh schedules
- D. synchronization of beacon intervals
Question #7
How does enabling webhook notifications enhance Cisco Meraki Wireless integration? (Choose one answer)
- A. periodic manual firmware installations
- B. predictable device discovery timing
- C. isolated notification delivery
- D. lightweight way to subscribe to alerts
Question #8
A network engineer is integrating Cisco ISE with a wireless controller for 802.1X authentication. The controller is registered with Cisco ISE as a network device. To secure communication, the engineer must configure a shared secret for RADIUS authentication. Which CLI command on the WLC accomplishes this task? (Choose one answer)
- A. 9800(config-radius-server)# radius enable authentication MySecretKey123
- B. 9800(config-radius-server)# ISE MySecretKey123
- C. 9800(config-radius-server)# key 0 MySecretKey123
- D. 9800(config-radius-server)# radius-server shared-secret MySecretKey123
Question #9
How does the optimized roaming function operate in a WLC implementation? (Choose one answer)
- A. It is integrated with external services for client wireless experience.
- B. It disassociates clients when the RSSI is lower than the set threshold.
- C. Load balancing is statically defined for all locations.
- D. Device locations are determined through peer-to-peer beacons.
Question #10
Refer to the exhibit. A network engineer is deploying a Central Web Authentication WLAN on a Cisco Catalyst 9800 WLC integrated with an external RADIUS server. Clients successfully connect to the SSID and are redirected to the external portal. After entering valid credentials, the portal indicates the login is successful, but the client remains in the redirect state and cannot access the network. Which configuration change must be made on the RADIUS server to allow the client to transition to RUN state? (Choose one answer)
- A. Add the server to the correct VRF.
- B. Configure support for CoA.
- C. Increase the Retry Count to 20.
- D. -
Which Cisco technology leverages machine learning methods and a cloud learning platform that helps to identify critical issues? (Choose one answer)