● NSE 5 - Secure Wireless LAN 7.6 Administrator Exam Materials
Dear valued clients,
We have passed the NSE 5 - Secure Wireless LAN 7.6 Administrator Exam, does this mean the dump is fully validated and ready? Not yet.
We need to take and pass the exam 2 more time to ensure that we have covered the entire question pool. We will confirm the final validation status soon.
Please keep waiting for our final confirmation. Good luck!
We have passed the NSE 5 - Secure Wireless LAN 7.6 Administrator Exam, does this mean the dump is fully validated and ready? Not yet.
We need to take and pass the exam 2 more time to ensure that we have covered the entire question pool. We will confirm the final validation status soon.
Please keep waiting for our final confirmation. Good luck!
Question #1
Question #2
Refer to the exhibit.
After configuring FortiAP in sniffer mode, an administrator notices that the capture file contains significantly more traffic than expected.
After reviewing the wtp-profile configuration, what is most likely causing this behavior?
(Choose one answer)
- A. FortiGate is mirroring traffic from multiple SSIDs.
- B. The buffer size is set too high.
- C. Channel 1 is a DFS channel with high traffic volume.
- D. FortiAP is decoding all traffic.
Question #3
Refer to the exhibit.
An administrator must preauthorize 50 FortiAP devices for a multi-site deployment.
Which configuration element must an administrator set during manual preauthorization to ensure the FortiAPs can successfully join the FortiGate controller?
(Choose one answer)
- A. The administrator must assign a FortiAP profile to each FortiAP device.
- B. The administrator must configure a unique FortiAP name to create the database entry.
- C. The administrator must enter the serial number of each FortiAP device in the FortiGate controller.
- D. The administrator must enable Override AP Login Password.
Question #4
A network administrator is troubleshooting intermittent wireless connectivity issues for a client connected to a 5 GHz SSID. They want to analyze over-the-air traffic without impacting the production wireless network.
Which two actions should the administrator take?
(Choose two answers)
- A. Place the sniffer AP close to the target client or AP.
- B. Enable packet capture on FortiGate.
- C. Use a dedicated FortiAP configured in sniffer mode.
- D. Change the SSID to open authentication.
Question #5
What is the main disadvantage of background spectrum analysis on FortiAP compared to using dedicated access points (AP) as sensors? (Choose one answer)
- A. It indicates poor rogue detection and possible packet loss.
- B. It requires additional FortiGuard licenses.
- C. It consumes more power and AP resources.
- D. It is not compatible with 802.11ax standards.
Question #6
Refer to the exhibits.
User1 is part of the infrastructure department and connects to the ONBOARD wireless network using the credentials user1. However, the dynamic VLAN assignment is not working.
Which configuration step must you take to fix this issue?
(Choose one answer)
- A. Add user1 in one of the VLAN names.
- B. Create a new VLAN name “infrastructure” with a VLAN ID associated with it.
- C. Disable the DHCP server on ONBOARD to allow VLAN assignment.
- D. Update user1 RADIUS attributes to include a VLAN ID attribute ID.
Question #7
During the troubleshooting process of a wireless intermittent connection issue between the wireless client and FortiAP, you attempt to use the wireless hardware MAC address as a reference to look up the device.
However, when you try to look up the hardware MAC address on the wireless controller, you are unable to find the address.
What is the reason you are unable to find the hardware MAC address of the wireless client?
(Choose one answer)
- A. The MAC address is available on wired devices.
- B. The wireless client hides the MAC address when connected to the wireless network.
- C. The wireless client uses a unique virtual MAC address for an SSID.
- D. The MAC address is masked by a layer 2 device.
Question #8
A wireless chipset calculates link rates based on which three factors? (Choose three answers)
- A. SSID broadcast settings
- B. Signal-to-noise ratio (SNR)
- C. Signal strength
- D. Low noise floor
- E. Frame retry and loss rate
Question #9
Which statement best describes background spectrum analysis scanning on FortiAP? (Choose one answer)
- A. It operates independently of DARRP and requires manual scheduling to prevent traffic disruption.
- B. It uses a dedicated radio to continuously monitor all channels and provides effective rogue AP detection.
- C. It simultaneously scans all configured channels every 600 seconds without affecting client connectivity.
- D. It opportunistically switches the radio to monitor mode during idle periods, which may cause packet loss during heavy traffic.
Question #10
An administrator relies on background scanning performed by FortiAP radios with DARRP enabled to detect rogue access points. Later, a security audit reveals that several rogue APs were not detected promptly.
Which limitation of background scanning most likely caused this issue?
(Choose one answer)
- A. Background scanning covers only the 5 GHz band, leaving 2.4 GHz networks unmonitored.
- B. Background scanning with DARRP requires a dedicated radio.
- C. Background scanning occurs only during idle periods and scans channels slowly.
- D. Background scanning floods the wireless medium with probe requests.
A network administrator manages a distributed enterprise network with 50 branch offices, each with FortiGate devices at the WAN edge and FortiSwitch devices at the LAN edge.
Users at multiple sites are reporting intermittent connectivity issues.
The administrator needs a centralized solution to monitor both LAN and WAN performance, identify trends, and drill down into specific site issues using AI-powered insights.
Which Fortinet solution would best address this requirement? (Choose one answer)